Xypex is a non-toxic, chemical treatment for the waterproofing and protection of concrete. Xypex's primary and most distinguishing performance feature is its unique ability to generate a non-soluble crystalline formation deep within the pores and capillary tracts of the concrete - a crystalline structure that permanently seals the concrete against the penetration of water and other liquids from any direction.

Xypex Admix C-1000NF

admix_bucket_lrg_png

Admix C-1000NF is a unique chemical treatment for the waterproofing, protection and improvement of concrete.

XYPEX ADMIX C-1000NF is added to the concrete mix at the time of batching. Xypex Admix C-1000NF consists of Portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration ofwater and other liquids from any direction.


Datasheet > MSDS > Specifiy >


XYPEX ADMIX C-SERIES
Xypex Admix C-Series has been specially formulated to meet varying project and temperature conditions. Xypex Admix C-1000 NF is designed for concrete, where normal to a mild retarded set is desired.

COMPLIANCE

Australian Standards - AS 1478.1: "Chemical Admixtures for Concrete"
Australian Standards - AS4020 "Products for Use in Contact with Drinking Water"
Good Environmental Choice Australia (GECA) - 'Environmentally Preferable'.
GECA
REDUCED ENVIRONMENTAL LOAD WITH XYPEX ADMIX C-1000NF
Xypex Admix C-1000NF is endorsed by GECA as environmentally preferable and therefore meet the requirements of Green Star Ratings in accordance with the Green Building Council of Australia. 

The GECA certification endorses Xypex Admix C-1000NF as having design and manufacturing attributes which directly reduce the environmental load by at least 30% when compared to similar concrete waterproofing and protection products available on the Australian market. View Certification >

RECOMMENDED FOR
• Basement/Substructures
• Bridge/Road Structures
• Chemical Protection
• Dam/Spillways/Reservoirs
• Lift Pits
• Marine Structures
• Power/Hydro Infrastructure
• Roof Decks
• Sewerage/Water Treatment
• Tunnels
• Roof Decks

ADVANTAGES
• Resists extreme hydrostatic pressure from either the positive or negative surface of the concrete slab
• Becomes an integral part of the substrate
• Highly resistant to aggressive chemicals
• Can seal hairline cracks up to 0.4 mm
• Allows concrete to breathe
• Non-toxic
• Less costly to apply than most other methods
• Permanent
• Added to the concrete at time of batching and therefore is not subject to climatic restraints
• Increases flexibility in construction scheduling

For specific information including as Test Data, Coverage, Installation Procedures on this product, please download a product data sheet.