Xypex is a non-toxic, chemical treatment for the waterproofing and protection of concrete. Xypex's primary and most distinguishing performance feature is its unique ability to generate a non-soluble crystalline formation deep within the pores and capillary tracts of the concrete - a crystalline structure that permanently seals the concrete against the penetration of water and other liquids from any direction.

Xypex Admix C-5000 - Durability


admix-c5000_bucket_lrg_png

 

XYPEX ADMIX C-5000 is a unique chemical treatment that has been specially formulated to enhance the durability of reinforced concrete exposed to aggressive conditions. Xypex Admix C-5000 is added to the concrete mix at the time of batching.

XYPEX ADMIX C-5000 is added to the concretemix at the time of batching. Xypex Admix C-5000 consists of Portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration ofwater and other liquids from any direction.

Datasheet > MSDS > Specifications >

..
FEATURES AND BENEFITS
The reaction products of Xypex Admix C-5000 are in mineral crystal form and prevent the penetration of deleterious ions into ordinary Portland cement concrete, fly ash concrete and slag cement concrete with equal effect. Research work in Australia, Canada and Japan has demonstrated that the Xypex C-Series Admix enhances the ability of concrete to resist sulphate attack, limits chloride ion penetration, improves the chemical resistance of reinforced concrete and accelerates autogenous healing of cracks.

Note: Xypex Admix C-Series has been specially formulated to meet varying project and temperature conditions (see Setting Time and Strength). Consult with a Xypex Technical Representative to determine
the most appropriate Xypex Admix and to obtain technical support literature for your project.

COMPLIANCE
Australian Standards - AS 1478.1: "Chemical Admixtures for Concrete"
Australian Standards - AS4020 "Products for Use in Contact with Drinking Water"
Good Environmental Choice Australia (GECA) - 'Environmentally Preferable'.
GECA
REDUCED ENVIRONMENTAL LOAD WITH XYPEX ADMIX C-5000
Xypex Admix C-5000 is endorsed by GECA as environmentally preferable and therefore meets the requirements of Green Star Ratings in accordance with the Green Building Council of Australia.  

The GECA certification endorses Xypex Admix C-5000 as having design and manufacturing attributes which directly reduce the environmental load by at least 30% when compared to similar concrete waterproofing and protection products available on the Australian market. View Certification >

RECOMMENDED FOR
Reinforced concrete (whether poured-in-place, pre-cast, pre-stressed, post-tensioned or shotcrete) that is subjected to aggresive environments.

ADVANTAGES
• Ease of application
• Becomes an integral part of the concrete
• Highly resistant to sulphates and chlorides
• Addresses a wide range of environmental issues
• Concrete protection from aggressive chemicals with a pH range of 3-11 in constant contact
• Can seal hairline cracks up to 0.4 mm
• Allows concrete to breathe
• Non-toxic
• Cost efficient
• Permanent
• Added to the concrete at time of batching and is therefore not subject to climatic restraints
• Increases flexibility in construction scheduling

For specific information including as Test Data, Coverage, Installation Procedures on this product, please download a product data sheet.