Xypex Quickset

Xypex Quickset is a water-soluble liquid blend of silicates, neutralizers and penetrating agents specially compounded to harden, dustproof and seal the surfaces of fresh or newly cured concrete floors.

Applied to the concrete surface, Xypex Quickset penetrates into the capillaries of the concrete substrate and chemically reacts with the free lime and calcium carbonate to form a hard, insoluble gel within the pores, thus closing off the small voids.

Quickset provides superior hardening and a dustproof finish.

RECOMMENDED FOR
- Concrete slabs where a hard, abrasion resistant (light to moderate traffic load), dustproof surface is required.

PACKAGING
Xypex Quickset is available in 3.79 litres bottles.

STORAGE
Xypex products must be stored dry at a minimum temperature of 7ºC. Shelf life is one year when stored
under proper conditions.

COVERAGE
Coverage rates will vary depending on surface conditions of the concrete, porosity, and project
requirements. The following rates are approximate, assuming average concrete, finish, temperature and other factors:
- Rough or Broom Finish 2.5 - 3.0 m2 / litre
- Moderately Trowelled Floor 3.0 - 3.8 m2 / litre
- Heavily Trowelled Floor 3.8 - 5.0 m2 / litre
For the best results, increase coverage rate for each succeeding coat.

For specific information including as Test Data, Coverage, Installation Procedures on this product, please download a product data sheet .