XYPEX ADMIX C-1000 NF

XYPEX ADMIX C-1000 NF is added to the concrete mix at the time of batching. Xypex Admix C-1000 NF consists of Portland cement and various active, proprietary chemicals.

These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction.

This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

The Xypex Admix C-Series has been specially formulated to meet varying project and temperature conditions. Xypex Admix C-1000 NF is designed for concrete, where normal to a mild retarded set is desired.

For specific information including Test Data, Coverage, Installation Procedures on this product, please download a product data sheet.

COMPLIANCE:

Xypex Admix C-1000 NF complies with the requirements of:

AS 1478.1-2000, Chemcial Admixture for Concrete, for Special Purpose Normal Setting (Type SN) Admixture
AS/NZS 4020:2005, Testing of products for use in contact with Drinking Water

APPLICATIONS:

Reservoirs
Sewage and Water Treatment Plants
Secondary Containment Structures
Tunnels and Subway Systems
Underground Vaults
Foundations
Parking Structures
Swimming Pools
Precast Components
Roof Decks
Basements
Bridge Structures

ADVANTAGES:

Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab
Becomes an integral part of the substrate
Highly resistant to aggressive chemicals
Can seal hairline cracks up to 0.4 mm
Allows concrete to breathe
Non-toxic
Permanent
Less costly to apply than most other methods
Added to the concrete at time of batching and therefore is not subject to climatic restraints
Increases flexibility in construction scheduling