Xypex Admix C-5000 complies with the requirements of:
- AS/NZS 4020:2005, Testing of products for use in contact with Drinking Water
Contact Numbers
AUSTRALIA
HEAD OFFICE
+612 6040 2444
ACT +612 9896 4999
NSW +612 9896 4999
NT +618 8297 1288
QLD +617 3442 4300
SA +618 8297 1288
TA +613 9543 7933
VIC +613 9543 7933
WA +618 9434 3844
NEW ZEALAND
+647 575 5410
SOUTH EAST ASIA
Singapore +65 6299 5836
Malaysia +603 5192 8186
Indonesia +62 21 420 1909
Xypex Modified
XYPEX MODIFIED can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls.
Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.
For specific information including Test Data, Coverage, Installation Procedures on this product, please download a product data sheet
COMPLIANCE:
APPLICATIONS:
Xypex Modified is recommended as a single coat for the dampproofing of foundations or as a second coat with Xypex Concentrate for the following applications:
- Reservoirs
- Sewage and Water Treatment Plants
- Secondary Containment Structures
- Tunnels and Subway Systems
- Basements
- Foundations
- Parking Structures
- Swimming Pools
- Roof Decks
ADVANTAGES:
- Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab
- Chloride protection in marine environment
- Becomes an integral part of the substrate
- Allows concrete to breathe
- Highly resistant to aggressive chemicals
- Non-toxic
- Does not require dry weather or a dry surface
- Cannot puncture, tear or come apart at the seams
- No costly surface priming or leveling prior to application
- Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
- Can be applied to the positive or the negative side of the concrete surface
- Does not require protection during backfilling or during placement of steel, wire mesh or other materials
- Less costly to apply than most other methods
- Not subject to deterioration
- Permanent
TECHNICAL DATA
RELATED TESTING REPORTS
COPYRIGHT XYPEX AUSTRALIA
